Photos

Thermal Branch Photos

Some of the members of the Thermal Engineering Branch. Taken in December 2022.
Taken in December 2022.
A group photo of some of the members of the Thermal Engineering Branch.

Full-Sized Image
Some of the members of the Thermal Engineering Branch. Taken in February 2015.
Taken in February 2015.
A group photo of some of the members of the Thermal Engineering Branch.

Full-Sized Image
A group photo of some of the members of the Thermal Engineering Branch. Taken in September 1996.
Taken in September 1996.
A group photo of some of the members of the Thermal Engineering Branch.

Full-Sized Image
The James Webb Space Telescope team working in the clean room.
The James Webb Space Telescope team working in the clean room.

Full-Sized Image
The James Webb Space Telescope (JWST) team in the clean room standing underneath the massive primary mirror.
The James Webb Space Telescope (JWST) team in the clean room standing underneath the massive primary mirror.

Full-Sized Image
The Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) team working in the clean room.
The Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) team working in the clean room.

Full-Sized Image
The TIRS-2 team in the clean room with the flight hardware.
The TIRS-2 team in the clean room with the flight hardware.

Full-Sized Image
Deepak Patel working on hardware in the clean room.
Deepak Patel working on hardware in the clean room.

Full-Sized Image
Frank Robinson with his Flow Boiling in Microgap Coolers (FBMC) payload experiment.
Frank Robinson with his Flow Boiling in Microgap Coolers (FBMC) payload experiment.

Full-Sized Image
Seth Abramczyk setting up a Cube Satellite thermal vacuum test.
Seth Abramczyk setting up a Cube Satellite thermal vacuum test.

Full-Sized Image
Elliot Schwartz working on the MDC chamber located in the T2D2 Facility.
Elliot Schwartz working on the MDC chamber located in the T2D2 Facility.

Full-Sized Image
Daniel Bae, Carlos Morell Rodriguez, and the DraMS team working on MEB hardware in the T2D2 Facility.
Regis Venti working on the Global Ecosystem Dynamics Investigation (GEDI) mission.

Full-Sized Image
Daniel Bae, Carlos Morell Rodriguez, and the DraMS team working on MEB hardware in the T2D2 Facility.
The T2D2 Facility team and the BurstCube team installing hardware into the Dynavac thermal vacuum chamber.

Full-Sized Image
Daniel Bae, Carlos Morell Rodriguez, and the DraMS team working on MEB hardware in the T2D2 Facility.
The T2D2 Facility team closing the Dynavac thermal vacuum chamber with the BurstCube hardware inside.

Full-Sized Image
Juan Rodriguez-Ruiz inspecting multi-layer insulation (MLI) on space hardware.
Juan Rodriguez-Ruiz inspecting multi-layer insulation (MLI) on space hardware.

Full-Sized Image
Colton Cohill bonding thermal hardware for the Roman Space Telescope (RST).
Colton Cohill bonding thermal hardware for the Roman Space Telescope (RST).

Full-Sized Image
Christine Cottingham with hardware for the Roman Space Telescope (RST).
Christine Cottingham with hardware for the Roman Space Telescope (RST).

Full-Sized Image
Daniel Bae, Carlos Morell Rodriguez, and the DraMS team working on MEB hardware in the T2D2 Facility.
Daniel Bae, Carlos Morell Rodriguez, and the DraMS team working on MEB hardware in the T2D2 Facility.

Full-Sized Image
Daniel Bae, Carlos Morell Rodriguez, and the DraMS team working on MEB hardware in the T2D2 Facility.
Mike Chapman working on LABView code for the T2D2 Facility.

Full-Sized Image
TIRS-2 hardware inside of a thermal vacuum chamber.
TIRS-2 hardware inside of a thermal vacuum chamber.

Full-Sized Image
TIRS-2 hardware being prepared for thermal vacuum testing.
TIRS-2 hardware being prepared for thermal vacuum testing.

Full-Sized Image
Colton Cohill finalizing the test setup up of the PACE Earth Coverage Antenna Hat Coupler.
Colton Cohill finalizing the test setup up of the PACE Earth Coverage Antenna Hat Coupler.

Full-Sized Image
Colton Cohill and Elliot Schwartz closing the Dynavac thermal vacuum chamber while testing the PACE Earth Coverage Antenna Hat Coupler.
Colton Cohill and Elliot Schwartz closing the Dynavac thermal vacuum chamber while testing the PACE Earth Coverage Antenna Hat Coupler.

Full-Sized Image
Frank Robinson and the PACE radio frequency (RF) team finalizing the test setup up of the PACE Earth Coverage Antenna Hat Coupler.
Frank Robinson and the PACE radio frequency (RF) team finalizing the test setup up of the PACE Earth Coverage Antenna Hat Coupler.

Full-Sized Image